IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

Set print station
RS-232 Syntax:
ESC c 0 n or X'1B;6330;n'
where:
n Specifies the print station.
Bit # ↓ Station
LSB 0 Reserved
1 Customer Receipt Station
2 Document Station - Portrait Mode
3 Document Station - Landscape Mode
4 Reserved
5 Reserved
6 Reserved
7 Reserved
Default:
n = 02
Remarks:
See “Document handling” on page 163.
Only one station can be set at a time. If you select more than one station,
the command is ignored.
Select user-defined or resident character sets
RS-232 Syntax:
ESC % n or X'1B;25;n'
where:
n=00 Select resident character sets
n=01 Select user-defined character sets
Default:
n = 00
Remarks:
See “Character fonts” on page 94 and “Download user-defined characters”
on page 116.
Set code page
RS-232 Syntax:
ESC t n or X'1B;74;n'
where:
n=00 Code Page 437 - United States
n=01 Code Page 858 - Multilingual
n=02 Code Page 863 - Canadian-French
n=03 Code Page 860 - Portugal
n=04 Code Page 865 - Norway
n=05 Printer’s Generic Code Page
August 24, 2004
Appendix C. RS-232 programming information 131

IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer Specifications

General

Brand	IBM
Model	4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer
Category	Printer
Language	English