IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

Print and form feed and cut the paper
RS-485 Syntax:
X'0C'
RS-232 Syntax:
FF or X'0C'
Epson compatibility syntax:
FF or X'0C'
Remarks:
v In standard mode, the data in the print buffer feeds the paper in the CR
station or DI station by a preset amount, until the document exits the
feed rollers. If a cutter is available (CR station only), it cuts the paper.
v In page mode, the printer prints the page, then returns to standard mode.
The page loaded in the printer’s buffer is cleared. The paper is not cut.
Print page in page mode
RS-485 Syntax:
X'1B 0C'
RS-232 Syntax:
ESC FF or X'1B 0C'
Epson compatibility mode:
ESC FF or X'1B 0C'
Remarks:
v In standard mode, this command is ignored.
v In page mode, this command prints the page that is loaded in the printer.
The page remains loaded in the printer’s buffer and the printer remains in
page mode. This should be used for repeatedly printing the same page,
or if there is a template that is filled in with each printout.
Clear print data in page mode
RS-485 Syntax:
X'18'
RS-232 Syntax:
CAN or X'18'
Remarks:
This command deletes all print data in the current printable area of the
page stored in the printer’s buffer.
August 24, 2004
Appendix C. RS-232 programming information 183
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer Specifications

General

Brand	IBM
Model	4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer
Category	Printer
Language	English