IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

Print predefined messages
RS-232 Syntax:
GS ^ message# or X'1D5E;message#'
where:
message#
The number associated with the stored predefined message.
v range = 1 to 25 for all models except TI8
v range = 1 to 25 for Model TI8
Purpose:
To print predefined print messages.
Remarks:
Valid at the beginning of the line only.
Retries will not be attempted on print errors.
Attention: Stored commands can increment status byte 6.See “Predefine
messages” on page 114.
Miscellaneous commands
Tab to next tab stop
RS-232 Syntax:
HT or X'09'
Purpose:
Moves the print position to the next tab stop.
Remarks:
See “Set horizontal tab positions” on page 135.
Tabs are valid when printing is aligned to the left only. If the tabs are used
when alignment is not left, results can be unpredictable. (See “Align
positions” on page 137.)
Return home (select printhead location)
RS-232 Syntax:
ESC < n or X'1B3C;n'
where:
n The print-head position:
00 Document home position
01 Open document throat position. On Models TI3, TI4, TI8,
TG3, and TG4, the DI station throat will automatically be
closed if the CR station is exercised.
02 Reserved
03 Left home position
04 Refined document home position. This can be used to
recover from a home error.
August 24, 2004
Appendix C. RS-232 programming information 155
|
|

IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer Specifications

General

Brand	IBM
Model	4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer
Category	Printer
Language	English