IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

Print and feed paper n lines
RS-232 Syntax:
ESC d n or X'1B64;n'
where:
n Specifies the number of line feeds.
Purpose:
Prints data in the print buffer and feeds the paper by the amount specified
in this command.
Print and feed paper using minimum units
RS-232 Syntax:
ESC J n or X'1B4A;n'
where:
n Specifies the line feed steps.
In the receipt station: 1 in. = 204 steps (1 mm = 8 steps).
In the document portrait station: 1 in. = 51 steps (1 mm = 2 steps).
In the document landscape station: 1 in. = 127 steps (1 mm = 5
steps).
Purpose:
Prints data in the print buffer and feeds the paper by the amount specified
in this command.
Print graphic messages
Select and print a graphics (logo) command
RS-232 Syntax:
ESC * d w h data or X'1B2A;d;w;h;data'
where:
d Dot density.
00 Normal Print - 200 dpi in the receipt station, 150 dpi in the
document station.
Note:
In the document station, this takes three passes of
the printhead for a logo that is 8 dots high.
01
Double wide - 100 dpi in the receipt station, 75 dpi in the
document station.
Note:
In the document station, this takes one pass of the
printhead for a logo that is 8 dots high.
02
Double wide and high - 100 dpi in the receipt station, 75 dpi
in the document station. Every dot row in the vertical
direction will be printed twice.
August 24, 2004
152 SureMark Printers User’s Guide
|
|
|

IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer Specifications

General

Brand	IBM
Model	4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer
Category	Printer
Language	English