IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

For immediate images (n1=0), the image data format is the currently
selected format. If any parameter is out of range, Command Reject is
returned.
Scanner calibration
RS-485 syntax:
X'1D 63 30'
RS-232 syntax:
GS c 0 or X'1D 63 30'
Purpose:
Used to initiate the calibration routine for the scanner in Model TI8 printer.
The printer scans the document multiple times and updates the printer’s
calibration data. See “Document scanner calibration (Model TI8)” on page
59 for more information about the document to be used.
Retrieve next image location
RS-485 syntax:
X'1D 4E 01 00'
RS-232 syntax:
GS N SOH NULL or X'1D 4E 01 00'
Remarks:
Returns the table position where the next image is stored. Command is
Extend MCT Request command (2-byte address). Status byte 5, bit 3 is set
to indicate data is attached.
Retrieve first unread image location
RS-485 syntax:
X'1D 4E 01 01'
RS-232 syntax:
GS N SOH SOH or X'1D 4E 01 01'
Remarks:
Stored images are searched sequentially, and the first location that has not
been set to ″read″ is returned. The command is Extend MCT Request
(2-byte address). Status byte 5, bit 3 is set to indicate data is attached.
August 24, 2004
176 SureMark Printers User’s Guide
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer Specifications

General

Brand	IBM
Model	4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer
Category	Printer
Language	English