SVCDOCS
For use by authorized service providers.
See the Description/Action column in the System reference code list for the system reference code you
have.
SVCPROC
For use by authorized service providers.
The service processor is failing.
Perform the following:
1. Select function 20 on the system unit control panel. Characters 2 through 4 are the system model, and
characters 5 through 8 are the processor feature code.
2. Use Table 1. below to determine the service information.
Table 1. Service information for the failing component
System model Name of FRU to exchange FRU position
Link to locations diagram
and failing component
service information (CCIN,
Part number, and remove
and replace procedure)
Model 270 System unit backplane MB1 See Locations — Model
270
Use the Model 270
diagrams and tables by
processor feature code and
follow the ″locations
diagram″ link, or the ″FRU
positions and Failing
Components″ link for the
processor feature code.
Models 800 and 810 System unit backplane MB1 See Locations - Models 800
and 810
Model 820 System unit backplane MB1 See Locations - Model 820
Model 825 System unit backplane CB1 See Locations - Models
825.
Models 830 and SB2 base
I/O tower (FC 9074)
Tower card CB1 See Locations - Models
830, SB2 system unit with
FC 9074 Base I/O Tower.
Models 840 and SB3 base
I/O tower (FC 9079)
Tower card CB1 See Locations - Models
840/SB3 System Unit with
Processor Tower and FC
9079 Base I/O Tower.
Models 870 and 890 Tower card CB1 See Locations - Models 870
and 890 with an FC 9094
Base I/O Tower
SYSBKPL
For use by authorized service providers.
The failing component is the system unit backplane.
464 iSeries: iSeries Server 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Hardware Problem Analysis and
Isolation
To Next Page
Loading...
Need help?
General