4. Install the interposer card in the interposer card connector on the RAID
adapter:
a. Remove the interposer card and the screw from the bag.
b. Rotate the plastic standoff on the interposer card so that it aligns with the
hole on the RAID adapter; then, align the connector on interposer card
with the interposer card connector on the RAID adapter.
c. Press the interposer card down onto the interposer card connector on the
RAID adapter until it is firmly seated.
d. From underneath the RAID adapter, insert the screw that you took from
the bag and tighten the screw to secure the interposer card to the RAID
adapter.
5. Connect one end of the remote battery cable to the interposer card.
Attention: To avoid damage to the hardware, make sure that the black dot
on the remote battery cable connector faces away from the interposer card on
the adapter. Do not force the remote battery cable into the connector.
Chapter 2. Installing optional devices 61
To Next Page
Loading...
Need help?
General