10. If you are instructed to return the upper power supply card, follow all
packaging instructions, and use any packaging materials for shipping that are
supplied to you.
Replacing the upper power supply card in the power-supply
paddle card assembly
Use this information to replace the upper power supply card in the power-supply
paddle card assembly.
About this task
To install the upper power supply card, complete the following steps:
Procedure
1. Touch the static-protective package that contains the upper power supply card
to any unpainted metal surface on the outside of the chassis; then, remove the
upper power supply card from the package.
2. Turn off the server (see “Turning off the server” on page 22) and all attached
peripheral devices. Disconnect all power cords; then, disconnect all external
cables as necessary to replace the device.
3. Align the upper power supply card with the two pointed tips and two screw
holes on the holder; then install the screws.
Figure 134. Upper power supply card removal
222 System x3650 M4 BD Type 5466: Installation and Service Guide
To Next Page
Loading...
Need help?
General