Replacing the battery pack
Replacing the battery pack
To replace the battery pack, do as follows:
1
Power off your computer, or enter hibernation mode.
2
Disconnect the AC Adapter and cables.
3
Close the LCD, and turn the computer over.
4
Slide the battery pack latch to the unlocked position
.1/; then remove the battery pack .2/.
2
1
5
Align the front of the fully charged spare battery pack
with the front side of the battery space in the computer
.1/; then put the battery pack in place .2/.
1
2
You can replace the battery when the computer is in
hibernation mode. (You cannot replace it when the
computer is in suspend mode.) If you are using a PC
Card, however, the computer might not be able to enter
hibernation mode. If this happens, power off the
computer.
36 IBM ThinkPad 600X User's Reference