Installing the DAA/Telephony Kit
7
Connect the cables:
DANGER
To avoid shock hazard, do not connect the
telephone cable to or disconnect it from the
computer during electrical storms.
Note:
Both ends of the DAA interface cable
are identical.
a) Connect one end of the DAA interface cable 1 to the
connector plug with the round receptacle.
b) Connect the other end of the DAA interface cable 2 to
the round receptacle on the DAA.
c) Connect the ferrite-core end connector 3 of the telephone
cable to the square receptacle on the DAA.
d) Connect the other end of the telephone cable to the
telephone outlet 4 on the wall.
Telephone
Outlet
Core
DAA
After you have finished attaching the modem/fax port, install the
necessary software by referring to the manual that came with the
option kit.
Refer to “Using the Telephony Function” on page 56 for information
about how to use the Mwave telephony features.
Chapter 6. Installing and Removing Options 151
To Next Page
Loading...
Need help?
General