15
5
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■ Receiving and transmitting
CAUTION: DO NOT Transmit without
an antenna.
q First, turn ON the PS-310
dc-dc
power supply.
w Hold down [
] for 1 second to turn
ON the transceiver.
• If no MMSI code is entered, “Push [ENT]
to register your MMSI” is displayed.
(p. 9)
e Rotate [VOL/SQL] to adjust the
audio level.
r Push [VOL/SQL] once or twice to
open the SQL Setting window.
t Rotate [VOL/SQL] to adjust the
squelch level until the noise just
disappears.
y Select a channel. (p. 13)
u Push [Ω] or [≈] until Software Key
function [HI/LO] is displayed.
i Push [HI/LO]
to select an
output power high or low.
Push
o Hold down [PTT], and speak at your
normal voice level.
• “ ” is displayed.
!0 Release [PTT] to return to receive.
NOTE:
Selecting a channel:
•
While receiving a signal, “ ” is displayed.
• You can use Channel 70 only for Digital
Selective Calling (DSC) transmissions.
• When the “FAV on MIC” item is set to
“OFF,” you can select all channels using
the [∫] or [√] keys on the microphone.
(p. 91)
Selecting an output power:
• “25W” is displayed when high power is
selected. Choose high power for longer
distance communications.
• “1W” is displayed when low power is
selected. Choose low power for short
range communications.
•
Some channels are restricted to low power.
To Next Page
Loading...
Need help?
General
