Icom IC-M803 User Manual

20
6

■ Setting a temporary operating frequency
5. Enter the desired transmit frequency directly by
using the Keypad key.
L 
6. 
TIP:
• If you want to save the entered frequency:
1. Push after the desired frequency
is entered.
• 
2. Push .
• The setting is saved and return to the
previous screen.
3. 
• If you want to change and save the frequency and
other settings of the selected channel, push
to open the Channel Edit screen.
See the next page for details.
• Push to change the operating mode to

You can temporarily change the operating frequency
of the selected channel. The frequency returns to the
preset value after you select another channel, or turn

1. Select a channel that is programmed near the
frequency you want to receive.
2. 
• The RX icon lights blue.
3. Enter the desired receive frequency.
TIP:
• and change
, or rotating [CH/

• 
is displayed above the selected digit.
• You can enter a frequency directly by using
the Keypad key.
NOTE:
• If you enter a frequency that is out of the
frequency range, an error beep sounds, and it
automatically returns to the preset frequency.
• If you enter a frequency using the Keypad key
and 10 seconds have passed without pressing

the preset value.
• BE SURE
frequency directly by using the Keypad key.
Example: Entering 6520.0 kHz

4. 
• The TX icon lights blue.
Push

Icom IC-M803 Specifications

General

Brand	Icom
Model	IC-M803
Category	Transceiver
Language	English