vi
KEY ICON DESCRIPTION
The keys are described in this manual as follows:
The keys that have words or letters on them are
described with the characters “[ ].”
Example: [ENT], [CLR]
The Software Keys are described with the words or
letters on a blue background, such as
or
.
The functions of the keys are shown at the bottom of
the display. Push the key below the desired function.
You can use the following keys on the Menu screen.
FUNCTION ACTION
Select
Enter
Push [ENT], [CH/GRP], or
.
Go to the next tree level
or
.
Go back to the previous
tree level
.
Cancel Push [CLR].
Exit
Push
.
The following action icons describe [CH/GRP], [ENT],
z Rotate
: Rotate [CH/GRP] to select.
z Push : Push [ENT] to enter or set.
z Push : Push the Keypad keys to enter a digit
or text.
z Push
RECOMMENDATION
CLEAN THE REMOTE CONTROLLERʼS
FRONT PANEL THOROUGHLY IN A BOWL OF
FRESHWATER after exposure to saltwater, and dry
keys, switches may become unusable, due to salt
L The connectors on the rear panel do not meet IPX7
.
NOTE: If the remote controller’s waterproof
protection appears defective, carefully clean it with
a soft, damp (freshwater) cloth, then dry it before
operating. The remote controller may lose its
waterproof protection if the case or connector cover
is cracked or broken, or the remote controller has
been dropped. Contact your Icom distributor or your
dealer for advice.
To Next Page
Loading...
Need help?
General
