46
7
DSC OPERATION
D Receiving a Distress Relay call
When a Distress Relay call is received:
• The emergency alarm sounds until you turn it OFF.
• “Received Distress Relay” is displayed.
1. Push to turn OFF the alarm.
L When “Accept after 10 sec.” or “Ignore after 10 sec.”
is selected in “CH Auto Switch” setting, the countdown
is displayed on the bottom of the window. (p. 58)
After 10 seconds have passed since
is
pushed, the screen will move to the DSC Task screen,
or return to the Main screen.
2. Push the Software Key below the intended
operation.
: Ignores the call and returns to the Main
screen.
: Puts the RX task on hold, and returns
to the Main screen.
: Pauses the countdown.
:
Enters the DSC Task mode immediately.
• One of the Emergency Frequencies is automatically
selected. Monitor it because a coast station may
require assistance.
• Rotate [CH/GRP] to conrm the call contents.
L See pages 27 and 28 for details of the Software Key
functions in the DSC Task mode.
■ Receiving DSC calls (Distress)
D Receiving a Distress Cancel call (continued)
3. Push , and then to return to
the Main screen.
TIP: When you push in step 2, the
countdown will be paused. Push to
resume the countdown.
Rotate
To Next Page
Loading...
Need help?
General
