Icom ID-5100A Service Manual

1-2
Transmitter
■
• Modulation system:
FM/FM-N Variable reactance frequency modulation
DV GMSK reactance frequency modulation
• Maximum Deviation:
FM  ±5.0 kHz
FM-N  ±2.5 kHz
• Microphone impedance: 600 ø
• Spurious emission:  –60 dBc
• Output power: High 25 W, Mid 15 W, Low 5 W (TPE version)
High 50 W, Mid 15 W, Low 5 W (Other versions)
Receiver
■
• Receive system: Double superheterodyne system
• IF frequencies:
Band A 1st IF 38.85 MHz
2nd IF 450 kHz
Band B 1st IF 46.35 MHz
2nd IF 450 kHz
• Sensitivity (except spurious points)
Amateur bands
FM/FM-N (12 dB SINAD)
 0.18 µV
DV (BER 1%)  0.28 µV
Except Amateur bands
FM/FM-N (12 dB SINAD)
 0.32 µV (137.000 to 159.995 MHz)
 0.56 µV (160.000 to 174.000 MHz)
 0.56 µV (375.000 to 399.995 MHz)
 0.32 µV (400.000 to 499.995 MHz)
 0.56 µV (500.000 to 550.000 MHz)
AM (10 dB S/N)  1 µV (118.000 to 136.99166 MHz)
• Squelch sensitivity:  0.13 µV (Threshold)
• Selectivity:
FM  60 dB
FM-N  55 dB
DV  50 dB
• Spurious and image rejection ratio:
 60 dB
 55 dB (A band UHF)
• AF output power:  2.0 W (at 10% distortion with an 8 ø load)
• AF output impedance: 8 ø
All stated specifi cations are typical and subject to change without notice or obligation.

Icom ID-5100A Specifications

General

Brand	Icom
Model	ID-5100A
Category	Transceiver
Language	English