Icom ID-E880 User Manual

X
QUICK REFERENCE GUIDE
N Repeater operation
1. Setting duplex
± Push [BAND] then rotate [DIAL] to select the frequency
band.
± Push [BAND] again, then rotate [DIAL] to select the re-
peater frequency.
± Push and hold [DUP](LOW) for 1 sec. then rotate [DIAL]
to select minus duplex or plus duplex.
Push [DUP](LOW) again.
[DUP][DIAL]
2. Repeater tone
Push and hold [TONE](M/CALL) for 1 sec. then rotate [DIAL]
to select “TONE,” if the repeater requires a subaudible tone to
be accessed. Push [TONE](M/CALL) again.
[TONE][DIAL]
Using the HM-133
Plus or minus duplex selection and the repeater tone setting
can be done easily via the HM-133.
Push [
DUP– 7(TONE)] for minus duplex; [DUP+ 8(TSQLS)]
for plus duplex selection, push [FUNC] then [
DUP– 7(TONE)]
to turn the repeater tone ON.
Push
Push , then
Push
QUICK REFERENCE

Icom ID-E880 Specifications

General

Brand	Icom
Model	ID-E880
Category	Transceiver
Language	English