Page 10 of 116
©HALE PRODUCTS, INC. Our policy is one of continuous development. We therefore
reserve the right to amend specifications without notice or obligation.
GENERAL DATA
COMPRESSOR
Model Enduro 12
Maximum Operating Speed 6500 rev/min
Nominal speed of operation 5000 rev/min
Nominal power consumption 75HP [56.0kW]
Direction of rotation Counter-clockwise (viewed on pulley)
Volume output 210 SCFM [5946 l/min] @ 125 PSI [8.6 Bar]
Operational pressure range 75-150 PSI [5.1-10.3 Bar]
PUMP
Minimum idle speed 600-700 RPM
COOLING SYSTEM
Type Oil / Water Plate Heat Exchanger
Cooling water flow-rate 13 G/min at 100Psi [50 l/min at 7.0 Bar]
FOAM PROPORTIONING SYSTEM 3.3 - CLASS A AND B FOAM COMPATIBLE
Manufacturer Hale Products Inc.
Model Foam unit 3.3
Type Electronic foam proportioning system
Operating voltage 12 and 24 volt systems available
Fuse rating 12V / 24V 60 / 40 amp
Current draw (Operating) 12V / 24V 30 / 15 amp
Current draw (Max) 12V / 24V 60 / 30 amp
Wire size 12V / 24V Minimum 8.5mm
2
Max. Foam Agent Flow rate 3.3 GPM [12.5 LPM]
FOAM PROPORTIONING SYSTEM 5.0 - CLASS A AND B FOAM COMPATIBLE
Model Foam unit 5.0
Max. Foam Agent Flow rate 5.0 GPM [19.0 LPM]
Other data as per Foam unit 3.3
FOAM PROPORTIONING SYSTEM 6.5 - CLASS A AND B FOAM COMPATIBLE
Model Foam unit 6.5 <1>
Max. Foam Agent Flow rate 6.5 GPM [24.6 LPM]
Current draw (Max) 12V / 24V 90 / 45 amp
NOTE <1> THE 12V SYSTEM USES A 24VDC MOTOR AND A 12 VDC TO 24 VDC CONVERTER.
For more information on the SmartFOAM units, refer to SmartFOAM Manual FSG-MNL-00158.
FOAM PROPORTIONING SYSTEM DUAL 6.5 - CLASS A AND B FOAM COMPATIBLE
Model Dual Foam unit 6.5
Max. Foam Agent Flow rate 13.0 GPM [49.2 LPM]
Other data as per Foam unit 6.5
To Next Page
Loading...
Need help?
General
