Idex HALE SmartCAFS User Manual

Page 60 of 116
©HALE PRODUCTS, INC. Our policy is one of continuous development. We therefore
reserve the right to amend specifications without notice or obligation.
OPTIONAL WATER AUTO-FILL OPERATION
The SmartCAFS water Auto-Fill system attempts to maintain the desired water tank level by gating
the KZCO valve on the inlet side of the pump. The system is controlled by the SmartCAFS display.
The Auto-Fill system gets the tank level information from the Class1 ITL (Intelli-Tank) water gauge.
The Auto-Fill system has two modes of operation: automatic and manual.
SYSTEM LAYOUT
For wiring harness diagrams and installation, refer to the FSG-PL-01422 documents within this manual
(Page 44).
COMPONENTS
Figure 35: Typical Auto-Fill assembly
7 PSI Pressure
Switch
KZCO Valve
Intake Relief Valve
Check Valve
3.0” Victaulics ends
Figure 34: Typical Auto-Fill layout

Idex HALE SmartCAFS Specifications

General

Brand	Idex
Model	HALE SmartCAFS
Category	Water Pump
Language	English