Page 78 of 116
©HALE PRODUCTS, INC. Our policy is one of continuous development. We therefore
reserve the right to amend specifications without notice or obligation.
ROUTINE MAINTENANCE
Between operations of the SmartCAFS unit make sure system components are filled with the proper
grade and amount of oil. These components include the Air Compressor System and the Drive Unit
Gearbox.
The following procedures are provided to assist in the periodic maintenance of oil levels. For detailed
maintenance instructions of individual components, refer to the maintenance and operation manuals
that were supplied with the apparatus.
Service should be performed by a trained and qualified service technician, or your authorized Hale
Products service representative. Be sure you have sufficient knowledge, experience, proper tools
and Hale genuine replacement parts before you attempt any repair maintenance.
For an illustrated SmartCAFS system, see: “MAJOR COMPONENTS AND CONTROLS” on page 14.
WARNING
DO NOT PERFORM MAINTENANCE ON THE SmartCAFS SYSTEM WHILE THE
APPARATUS
IS RUNNING. MAKE SURE THE APPARATUS IS SHUT DOWN
AND COMPONENTS HAVE
COOLED BEFORE ATTEMPTING MAINTENANCE.
THE PROPER OIL LEVEL MUST BE MAINTAINED IN THE AIR COMPRESSOR
SYSTEM AT
ALL TIMES. LOW OIL LEVEL OR NO OIL COULD RESULT IN
EXCESSIVE COMPRESSOR
TEMPERATURE AND MAJOR DAMAGE. HIGH
OIL LEVEL COULD CAUSE THE CONTROL
SYSTEM TO MALFUNCTION OR CAUSE A DRIVE FAILURE.
To Next Page
Loading...
Need help?
General
