Page 28 of 116
©HALE PRODUCTS, INC. Our policy is one of continuous development. We therefore
reserve the right to amend specifications without notice or obligation.
PANEL STRAINER
• The CAFS system cooling water strainer
is mounted to the pump panel through a 2-
1/8” (54 mm) hole, with the supplied
placard as shown in Figure 25.
• Plumb 3/8” (9.5 mm) tubing between the
tee, mounted on the bottom of the strainer,
and the drain valve.
• Also see Plate # PL977 for additional info.
Figure 24: Water Strainer Plumbing
Figure 25: Water Strainer Cut-out
To Next Page
Loading...
Need help?
General
