Page 115 of 116
©HALE PRODUCTS, INC. Our policy is one of continuous development. We therefore
reserve the right to amend specifications without notice or obligation.
STANDARD: 102714
HIGH PRESSURE KIT: 8713198-1
Paddlewheel measures the water flow
before foam and air injection. The high
pressure kit is for qtwo and other high
pressure pump applications.
• No signal from paddlewheel can
result in:
o No foam injection
o No air injection
• Poor CAFS performance
o Paddlewheel is out of calibration
o Not properly grounded (can
result in large jumps in the water
flow reading).
Air inject check valve prevents water from
entering the oil separator.
• Check Valve failure can result in:
o Water in the Oil Separator
o Poor CAFS pressure matching
To Next Page
Loading...
Need help?
General
