To Next Page

To Previous Page

IDS805 USER MANUAL NO. 700-266-01A ISSUED NOV 2003 VER 1.00 15

IDS805 USER MANUAL

is now bypassed.

4. Repeat steps 1 and 2 to bypass any other zones.

NOTE:

Some zones may be programmed to function in a manner which does

not permit bypassing e.g. Panic zones.

6.2 To Un-Bypass a Zone

[

!] + [ZONE NUMBER]

1. Press the [

!] key.

2. Press the number corresponding to the currently bypassed zone

3. The zone indicator will extinguish - the zone is now active.

7. Disarming the System

7.1 Disarming with a User Code

[#] + [USER CODE]

To disarm the system, enter a valid [USER CODE] before the expiry of

the entry delay. Although not essential, it is recommended that the [#]

key be pressed before entering a user code as this clears any

unintended key entries.

! Enter the premises through a designated entry/exit door. Enter-

ing via any other route will cause an alarm.

! As soon as the entry/exit zone is violated i.e. the door has been

opened, the entry delay begins.

! The keypad buzzer will sound for the duration of the entry period

to indicate that a valid user code is required.

! If the ARMED indicator remains illuminated, an error was made

while entering the user code, press the [#] key and re-enter the

code.

! Once the system disarms, the ARMED indicator will extinguish

and the keypad buzzer will stop sounding.

! If no valid user code has been entered by the end of the entry

delay period, an alarm condition will be registered.

IDS IDS805 User Manual

Other manuals for IDS IDS805