Integra DHC-80.3 User Manual

73
En
Multi Zone
In addition to the main listening room, you can also enjoy playback in the other room, or as we call Multi Zone. And, you
can select a different source for each room.
Zone 2/3 speakers must be connected to individual
amplifiers in Zone 2/3.
Connecting the Zone Speakers to Individual
Amplifiers
This setup allows 9.2-channel playback in your main
listening room and 2.1-channel playback in Zone 2/3.
Note
• With the default settings, the Zone 2/3 volume must be set on the
Zone 2/3 amplifier. If your Zone 2/3 amplifier has no volume
control, change the setting so that you can set the Zone 2/3
volume on the AV controller. See “Multi Zone” (➔ page 66).
Zone 2 Video Output
The AV controller features composite video and
component video outputs for connection to a TV in
Zone 2, so that you can enjoy both audio and video in that
zone.
Note
• If you use the COMPONENT VIDEO ZONE 2 OUT, you must
set the “Zone 2 Component Video Out” setting to “Yes”
(➔ page 66).
•The COMPONENT VIDEO ZONE 2 OUT outputs video of
components connected to component video inputs only.
•The ZONE 2 OUT V jack outputs video of components con-
nected to composite video only.
Making Multi Zone Connections
R
L
IN
R
L
IN
LINE INPUT
LINE INPUT
Main room
Zone 2
AV controller
Receiver/
integrated amp
Receiver/
integrated amp
Zone 3
Powered subwoofer
Multichannel power amp
Powered subwoofer
Main room
Zone 2
TV
AV controller
TV
or

Integra DHC-80.3 Specifications

General

Brand	Integra
Model	DHC-80.3
Category	Controller
Language	English