D-0120578-C – 2019/11
Eclipse – Instructions for Use - US
Page 16
2.7 Starting up from OtoAccess® Database
Ensure that the Eclipse is switched on and connected before opening the software module. If the hardware is
not detected the selected Eclipse module can still be opened, but the test cannot start until the hardware is
detected.
To start from OtoAccess® Database:
1. Open OtoAccess® Database
2. Select the patient you want to work with by highlighting it blue
3. If the patient is not yet listed:
• press the Add new patient icon.
• fill in at least the mandatory fields, marked with an arrow.
• save the patient details by pressing the Save icon.
4. Double click on the wanted module to start the test.
2.7.1 Module setup in OtoAccess® Database
Working with the Interacoustics OtoAccess® Database, please refer to the instruction for use for the
database.
To Next Page
Loading...
Need help?
General
