D-0120578-C – 2019/11
Eclipse – Instructions for Use - US
Page 24
3.1.15 Save & New
The Save & New icon saves the current test session and allows a new session to be started without closing
down the software. If no data was recorded, a session will not be saved.
When editing a historic session, the session date remains unchanged in the database as this always refers
to the date of the recording.
3.1.16 Save & Exit
The Save & Exit icon saves the current test session and closes down the software. If no data was recorded,
a session will not be saved.
When editing a historic session, the session date remains unchanged in the database as this always refers
to the date of the recording.
To exit without saving, click on the red ‘X’ in the upper right hand corner of the screen.
3.1.17 Stimulus rate selection
Select a different stimulus rate from the dropdown menu.
3.1.18 Frequency selection
Select a different stimulus frequency from the dropdown menu.
3.1.19 Stimulus window
The Stimulus window displays the stimulus parameters for the curve
currently being recorded – Stimulus level, Stimulus type, Masking on or off,
Test ear, Transducer, Stimulus rate, Stimulus polarity, the High Pass Filter
setting and the Low Pass Filter setting.
To Next Page
Loading...
Need help?
General
