iStorage datAshur PRO+C User Manual

iStorage datAshur® PRO
+
C
User Manual v1.0
13
5. Enter your new User PIN
BLUE LED continues to blink.
7. Re-enter your new User PIN
GREEN LED continues to blink.
8. Press KEY button TWICE (double-click)
Solid RED LED changing to GREEN solid LED indicating successful User
PIN change.
6. Press KEY button TWICE (double-click)
Blinking BLUE LED switches to a blinking GREEN LED.
Note: The User PIN can also be changed by the Administrator using the Admin PIN if one exists, refer to section
14 ‘How to change the User PIN in Admin mode’. If a mistake was made while dening a new User PIN or the
procedure was not completed, the drive will retain the old User PIN.
5. How to access drive settings in User mode
The drive settings mode will allow the user to perform different functions such as creating an
Admin PIN, enabling and disabling the datAshur PRO
+
C as Read-Only, setting a Timeout lock
and determining the device version number.
1. Press KEY button once
RED, GREEN & BLUE LEDs will ash together once and then the RED LED
will continue to blink. (Note: Both RED and BLUE LEDs will blink together
if an Admin PIN also exists).
2. Enter your current User PIN
RED LED will continue to blink.
The table below illustrates how to access the drive settings mode,
sections 6-11 describe how to perform the various functions.

iStorage datAshur PRO+C Specifications

General

Brand	iStorage
Model	datAshur PRO+C
Category	Storage
Language	English