iStorage datAshur PRO+C User Manual

iStorage datAshur® PRO
+
C
User Manual v1.0
33
To create an Admin PIN after a Brute Force attack
or Reset, proceed with the following steps.
1. Press KEY button once
RED, GREEN & BLUE LEDs will ash together once and then switch to a
solid RED LED and a blinking GREEN LED.
3. Enter your new 8-15 digit Admin PIN
RED and BLUE LEDs will continue to icker.
5. Re-enter your new Admin PIN
GREEN LED will continue to blink.
2. Press and hold down the number 1 button and press the
KEY button TWICE (double click)
Solid RED LED and blinking GREEN LED will switch to ickering RED
and BLUE LEDs.
4. Press KEY button TWICE (double click)
Flickering RED and BLUE LEDs will switch to a blinking GREEN LED.
6. Press KEY button TWICE (double click)
Blinking GREEN LED will change to solid RED LED and then switch to a ickering
GREEN LED indicating that the Admin PIN was successfully created.
27. Booting from the datAshur PRO
+
C
iStorage datAshur PRO
+
C USB drives are equipped with a boot
delay feature in order to accommodate power cycling during a
host boot process.
There may be occasions where you might want to boot from
the datAshur PRO
+
C for various reasons. When booting from
the datAshur PRO
+
C, you are running your computer with the
operating system that is installed on the datAshur PRO
+
C.
No special actions are required on the part of the user, and to
use this feature, simply unlock the drive and connect to the
USB port of a host computer.
To force an immediate lock, always unplug to remove USB
power to the datAshur PRO
+
C.

iStorage datAshur PRO+C Specifications

General

Brand	iStorage
Model	datAshur PRO+C
Category	Storage
Language	English