iStorage datAshur PRO+C User Manual

iStorage datAshur® PRO
+
C
User Manual v1.0
14
3. Press KEY button once
Solid RED LED switches to a solid GREEN LED indicating successful User
PIN entry.
4. Press KEY button THREE times (triple-click)
Solid GREEN LED switches to blinking GREEN and BLUE LEDs indicating
the drive is awaiting new user dened drive settings.
4. Press the KEY button once
GREEN and BLUE LEDs will change to a solid RED LED before switching
to a solid GREEN LED indicating successful Read-Only conguration.
3. Press button number 7 followed by the number 6 button (76)
GREEN and BLUE LEDs will continue to blink.
6. How to enable Read-Only as User
To set the datAshur PRO
+
C to Read-Only in User mode,
proceed with the following steps.
1. Unlock the datAshur PRO
+
C with your User PIN
GREEN LED will be solid indicating successful User PIN entry.
2. Press the KEY button THREE times (triple-click)
Solid GREEN LED switches to blinking GREEN and BLUE LEDs indicating
the drive is awaiting new user dened settings.
Note: Once activated, drive access is limited to Read-Only. When datAshur PRO
+
C is unlocked and inserted
into a USB port the GREEN LED blinks every two seconds indicating the drive is in Read-Only Mode. Admin can
override User Read/Write settings by enabling/disabling Read/Write in Admin mode.

iStorage datAshur PRO+C Specifications

General

Brand	iStorage
Model	datAshur PRO+C
Category	Storage
Language	English