jcb 19C-1E User Manual

Technical Data
Performance Dimensions
Performance Dimensions
Excavator End Dimensions and Performance
Digging
Figure 116.
K
J
H
A
B
H
C
G
D
E
F
Table 16.
Item Description Dimensions
Boom length 1,800mm 1,800mm 1,800mm
Dipper length 950mm 1,100mm 1,344mm (Grave-
master)
A Maximum digging reach 3,899mm 4,043mm 4,247mm
B Maximum digging reach on
ground
3,834mm 3,981mm 4,220mm
Maximum digging depth - doz-
er up
2,271mm 2,421mm 2,665mmC
Maximum digging depth - doz-
er down
2,426mm 2,576mm 2,819mm
D Maximum digging height 3,556mm 3,667mm 3,847mm
E Maximum dump / load-over
height
2,598mm 2,637mm 2,818mm
F Maximum height to dipper
nose pivot pin
3,116mm 3,154mm 3,335mm
G Maximum vertical wallcut
depth
2,438mm 2,534mm 2,518mm
Minimum front swing radius
(no offset)
1,488mm 1,517mm 1,565mmH
Minimum front swing radius
(fully offset)
1,171mm 1,196mm 1,236mm
J Boom swing left 75° 75° 75°
K Boom swing right 55° 55° 55°
- Bucket rotation 201° 201° 201°
- Dipper rotation 126° 126° 126°
- Bucket tearout (power posi-
tion)
18kN 18kN 18kN
151 9831/8250-4 151
JCB © Admin Pimteam - 23/06/2021 05:32.

jcb 19C-1E Specifications

General

Battery Type	Manganese laminated Lithium-ion
Battery Rated Capacity	14.8 kWh (3 Pack) 19.8 kWh (4 Pack)
Charging	On-board charger with direct connection from AC mains power supply
Charging Time	110V – 12 hrs 230V – 8 hrs
Fast Charging (Optional)	Off-board charger, with connection to 415V 3-Phase supply Charging time <2 hrs
System Voltage	48V
Motor Type	AC permanent magnet
Motor Power	7 kW continuous 20kW peak
Operating Modes	L – 1200rpm G – 1600rpm H – 1800rpm Auto Kick Up – 2300rpm, 2 speed tracking only
Thermal Limitations	Operation: -10oC to +46oC Charging: -10oC to +40oC