jcb 19C-1E User Manual

Operation
Introduction
Operation
Introduction
General
The aim of this part of the manual is to guide the operator step-by-step through the task of learning how to
operate the machine efficiently and safely. Read the Operation section through from beginning to end.
The operator must always be aware of events happening in or around the machine. Safety must always be the
most important factor when you operate the machine.
When you understand the operating controls, gauges and switches, practice using them. Drive the machine in
an open space, clear of people. Get to know the 'feel' of the machine and its driving controls.
Do not rush the job of learning, make sure you fully understand everything in the Operation section. Take your
time and work efficiently and safely.
Remember:
• Be careful.
• Be alert.
• Be safe.
21 9831/8250-4 21
JCB © Admin Pimteam - 23/06/2021 05:32.

jcb 19C-1E Specifications

General

Battery Type	Manganese laminated Lithium-ion
Battery Rated Capacity	14.8 kWh (3 Pack) 19.8 kWh (4 Pack)
Charging	On-board charger with direct connection from AC mains power supply
Charging Time	110V – 12 hrs 230V – 8 hrs
Fast Charging (Optional)	Off-board charger, with connection to 415V 3-Phase supply Charging time <2 hrs
System Voltage	48V
Motor Type	AC permanent magnet
Motor Power	7 kW continuous 20kW peak
Operating Modes	L – 1200rpm G – 1600rpm H – 1800rpm Auto Kick Up – 2300rpm, 2 speed tracking only
Thermal Limitations	Operation: -10oC to +46oC Charging: -10oC to +40oC