jcb 19C-1E User Manual

Technical Data
Vibration Emissions
Vibration Data
Figure 119.
ZZY
Z
D4D3D2
D1
0.02
1.14
0.33
0.52
m/s² A(8) m/s² A(8)
X-Z Dominant axis D1 Machine operating duty: Low Idle
D2 Machine operating duty: Excavating D3 Machine operating duty: Tracking (rough
terrain)
D4 Machine operating duty: Tracking (concrete)
Whole-body vibration emission determined in accordance with ISO 2631-1:1997 for this machine type is 0.33
m/s² normalised to an 8h reference period [A(8)] and based upon a test cycle defined in SAE J1166.
Hand-arm vibration determined in accordance with dynamic test conditions defined in ISO 5349-2: 2001 does
not exceed 2.5 m/s.
Error bars are due to variations in vibration emissions due to measurement uncertainty (50% in accordance
with EN 12096: 1997).
155 9831/8250-4 155
JCB © Admin Pimteam - 23/06/2021 05:32.

jcb 19C-1E Specifications

General

Battery Type	Manganese laminated Lithium-ion
Battery Rated Capacity	14.8 kWh (3 Pack) 19.8 kWh (4 Pack)
Charging	On-board charger with direct connection from AC mains power supply
Charging Time	110V – 12 hrs 230V – 8 hrs
Fast Charging (Optional)	Off-board charger, with connection to 415V 3-Phase supply Charging time <2 hrs
System Voltage	48V
Motor Type	AC permanent magnet
Motor Power	7 kW continuous 20kW peak
Operating Modes	L – 1200rpm G – 1600rpm H – 1800rpm Auto Kick Up – 2300rpm, 2 speed tracking only
Thermal Limitations	Operation: -10oC to +46oC Charging: -10oC to +40oC