About the Product
Product and Component Identification
Product and Component Identification
Machine
Your machine has an identification plate mounted as shown. The PIN (Product Identification Number), type,
weights, nominal system voltage, year of manufacture, year of model and serial number of the machine are
shown on the plate.
Figure 5.
A Identification plate
The machine model and build specification are indicated by the PIN. The PIN has 17 digits and must be read
from left to right. For example, JCBE19C1L01234567.
Table 1. Explanation of the PIN
Digit Description
1 to 3 World manufacturer identification. For example, JCB = UK Build.
4 to 8 Machine type and model.
9 Random check Letter. The check letter is used to verify the authenticity of a machine's PIN.
10 to 17 Machine serial number.
Operator Protective Structure
WARNING Do not use the machine if the falling objects protection level provided by the structure is not
sufficient for the application. Falling objects can cause serious injury.
WARNING You could be killed or seriously injured if you operate a machine with a damaged or missing
ROPS/FOGS/TOPS. If the ROPS/FOGS/TOPS has been in an accident, do not use the machine until the
structure has been renewed. Modifications and repairs that are not approved by the manufacturer may be
dangerous and will invalidate the ROPS/FOGS/TOPS certification.
WARNING Machines with a ROPS, FOGS or TOPS are equipped with a seat belt. The ROPS, FOGS or
TOPS is designed to give you protection in an accident. If you do not wear the seat belt you could be thrown
off the machine and crushed. You must wear a seat belt when using the machine. Fasten the seat belt
before starting the machine.
WARNING Modified and wrongly repaired ROPS, TOPS and FOGS are dangerous. Do not modify the
TOPS. Do not attempt to repair the ROPS, TOPS and FOGS. If the ROPS, TOPS and FOGS has been in
an accident, do not use the machine until the structure has been examined and repaired. This must be done
by a qualified person. For assistance, contact your JCB dealer. Failure to take precautions could result in
death or injury to the operator.
8 9831/8250-4 8
JCB © Admin Pimteam - 23/06/2021 05:32.
To Next Page
Loading...
Need help?
General
