Operation
Safety Equipment
95 95
9811/9950-1
Beacon
In certain territories you will be breaking the law if you do
not fit a rotating beacon before you travel on public
highways - make sure you are complying with local laws.
Note: Be careful when you operate the machine with a
beacon. The total height of the machine is increased when
the beacon is in the operating position.
1 Put the beacon A on the cab roof.
Note: The beacon is held in position by a magnetic base.
2 Put the plug B into the cab roof socket C.
3 Use the switch D to operate the beacon. The indicator
light in the switch comes ON when the beacon is
operating.
732010-6
Fig 45.
A
To Next Page
Loading...
Need help?
General
