1 1
9811/9950-1
Introduction
About this Manual
Machine Model and Serial Number
This manual provides information for the following
model(s) in the JCB machine range:
– 8026 CTS from serial number 1779000.
– 8025 ZTS from serial number 1226500.
– 8030 ZTS from serial number 1228500.
– 8035 ZTS from serial number 1230500.
Using this Manual
T1-044
This manual is arranged to give you a good understanding
of the machine and its safe operation. It also contains
maintenance information and specification data. Read this
manual from front to back before using the machine for the
first time. Particular attention must be given to all the safety
aspects of operating and maintaining the machine.
If there is anything you are not sure about, ask your JCB
distributor or employer. Do not guess, you or others could
be killed or seriously injured.
General warnings in this chapter are repeated throughout
the book, as well as specific warnings. Read all the safety
statements regularly, so you do not forget them.
Remember that the best operators are the safest
operators.
The illustrations in this manual are for guidance only.
Where the machines differ, the text and or the illustration
will specify.
To Next Page
Loading...
Need help?
General
