Optional Attachments
Buckets
271 271
9811/9950-1
Installing a Bucket - Non Quickhitch
Models
See Bucket Selection.
Note: This job is easier done by two people - one to
operate the controls and one to line up the pivots.
1 Position the Bucket
Set the bucket flat on level ground, using a suitable
lifting device.
!MWARNING
Do not use your fingers through the holes to align the
links.
8-2-9-32
2 Engage the Dipper
If necessary move the machine to align the pivot pin
holes. Carefully align the holes in the dipper and
bucket link with the bucket. Fit the pivot pins B and
lynch pin A. K
Fig 106. ( T 269)
Fig 107.
B
A
To Next Page
Loading...
Need help?
General
