Optional Attachments
Quickhitch Rockbreaker
277 277
9811/9950-1
Quickhitch Rockbreaker
Introduction
The standard machine has a single-acting hydraulic circuit
for use with the applicable single-acting hydraulic
attachments. The attachments that need double-acting
hydraulics for example the JCB Augers must have
additional (optional) pipework installed, for more
information contact your JCB Distributor.
For details of the installation of the attachments refer to the
Attachment Handbook, for more information contact your
JCB Distributor.
Removing a Quickhitch Rockbreaker
!MCAUTION
When the Quick-Hitch is installed and its attachment
fitted, there is a danger of the attachment hitting the
underside of the boom. Operate the boom and dipper
carefully when the Quick-Hitch and its attachment are
fitted.
2-4-4-2
Note: When possible, put the Quickhitch attachments on
hard, level ground to make the installation procedure safe
and easier.
1 Park the machine on firm, level ground.
To Next Page
Loading...
Need help?
General
