Optional Attachments
Quickhitch Rockbreaker
278 278
9811/9950-1
!MCAUTION
The rockbreaker must be positioned correctly before
attempting to release it from the Quickhitch. if
incorrectly positioned, the rockbreaker could swing or
fall suddenly from the machine when releasing the
Quickhitch latch hook.
8-2-9-36
2 Position the breaker just clear of the ground and at an
angle such that the breaker does not detach from the
front pivot pin when the Quickhitch is unlatched.
Typically shown at V. K
Fig 112. ( T 280).
!MWARNING
Hydraulic Hoses
Damaged hoses can cause fatal accidents. Inspect the
hoses regularly. Do not use the machine if a hose or
hose fitting is damaged.
INT-3-3-2_4
!MWARNING
Fluid Under Pressure
Fine jets of fluid at high pressure can penetrate the
skin. Keep face and hands well clear of fluid under
pressure and wear protective glasses and gloves.
Hold a piece of cardboard close to suspected leaks
and then inspect the cardboard for signs of fluid. If
fluid penetrates your skin, get medical help
immediately.
INT-3-1-10_3
3 Stop the engine.
4 Turn the starter key to the 'I' position.
5 Operate the auxiliary attachment control pedal, this
will release any hydraulic pressure trapped in the
system.
6 Disconnect the hydraulic hoses.
To Next Page
Loading...
Need help?
General
