Routine Maintenance
Checking for Damage
199 199
9811/9950-1
Checking for Damage
Check the Machine Body and Structure
T3-063_4
Make sure that all guards and protective devices are in
place, attached by their locking devices and free from
damage.
Inspect all steelwork for damage. Note damaged paintwork
for future repair.
Check pivot pins are correctly in place and secured by their
locking devices.
Check steps and handrails are undamaged and secure.
Check for broken, cracked or crazed window glass and
mirrors. Replace damaged items.
Check all lamp lenses for damage.
Check all attachment teeth are undamaged and secure.
Check all safety and instructional labels are in place and
undamaged. Fit new labels where necessary.
Check the Seat and Seat Belt
T3-008_2
!MWARNING
When a seat belt is fitted to your machine replace it
with a new one if it is damaged, if the fabric is worn, or
if the machine has been in an accident. Fit a new seat
belt every three years.
2-3-1-7_1
Inspect the seat belt for signs of fraying and stretching.
Check that the stitching is not loose or damaged. Check
that the buckle assembly is undamaged and works
correctly.
Check that the belt mounting bolts are undamaged,
correctly fitted and tightened.
To Next Page
Need help?
General
