Optional Attachments
Buckets
269 269
9811/9950-1
Removing a Bucket - Non Quickhitch
Models
P11-4002
1 Position the Boom
Slew the boom so that it is straight in front of the
machine. Rest the bucket on level ground, with the
dipper approximately vertical and the bucket flat to
the ground. Block the bucket to prevent its movement.
!MWARNING
Stand clear and to one side of the bucket while you
remove the pivot pins. With the pins removed, the
bucket could roll over.
2-2-6-6
2 Detach the Bucket
Remove the lynch pin A and the pivot pins B.
Fig 106.
B
A
To Next Page
Loading...
Need help?
General
