Operation
Getting the Machine Moving
139 139
9811/9950-1
Operating Procedure
After you have warmed up the engine, move off as
described below.
Note: Control and switch locations are provided within this
manual. Refer to Cab Layout.
1 Check your seat belt and seat.
a Make sure that your seat belt is correctly
fastened.
b Make sure that the seat is correctly adjusted.
2 Make sure that the cab slew lock is disengaged and
the slew switch is pressed.
3 Move off.
a Check that the attachments are in the travel
position.
b Take hold of both track control levers in one hand.
c Make sure that it is safe to move off.
d Move the levers forward or backward as required
and pull the throttle lever slowly backward until the
desired speed is attained.
e To increase tracking speed operate the two speed
tracking switch.
To Next Page
Loading...
Need help?
General
