Optional Attachments
Buckets
268 268
9811/9950-1
Buckets
Bucket Selection
!MWARNING
The bucket selected should be the correct width to suit
the hole/trench to be excavated. However, if the hole
width demands the larger bucket, consideration
should be given to the density/weight of the material to
be moved affecting the stability of the machine
especially if working on a slope. If there is danger of
the machine's stability being compromised, then
select a smaller bucket or reposition the machine.
8-2-9-45
!MCAUTION
When buckets 750 mm (29.5 in) or wider are fitted to
the machine, use extreme caution in operation to
avoid contact with the cab.
0122_1
Use the 300 mm (12 in.) wide bucket for narrow
excavations or for maximum penetration when digging in
hard, rocky or clay soils.
Larger buckets are ideally suited to bulk shifting light or
loose materials.
To Next Page
Loading...
Need help?
General
