Section 3 - Maintenance
Routine Maintenance
Check for Damage and Cleaning
3-9 3-9
9803-9570-4
Check for Damage and Cleaning
!MWARNING
The exhaust pipe becomes extremely hot when the
engine is running and will remain so for some time
after the engine is stopped. If you touch the hot pipe
you could be severely burned.
13-2-4-11
Clean the machine using water and/or steam. Pay
particular attention to the underside. Do not allow mud to
build up on the engine, transmission and tracks. Make sure
that the oil cooler grille is not blocked.
Regularly check and clean the engine cooling fins using
compressed air.
Excessive power washing can cause damage to seals and
bearings. Do not direct high power water jets at oil seals or
electrical components.
Inspect steelwork for damage. Note damaged paintwork
for future repair.
Make sure all pivot pins are correctly in place and secured
by their locking devices.
Ensure that the handrails are undamaged and secure.
Inspect the tracks for damage and penetration by sharp
objects.
Check that all safety decals are in place and undamaged,
fit new decals where necessary.
manualequipospesados@gmail.commanualequipospesados@gmail.com
To Next Page
Loading...
Need help?
General
