– 79 –
③
Setting the number of stitches and pitch of the selected step
1. Press
❺
while a step is being
selected. Then, the polygonal-shape
stitching pattern step edit screen is dis-
played.
2. Select an item to edit by pressing
❶
. Then, edit the item by
pressing
❷
. Items that can
be edited in this procedure are same
with those of sewing pattern that can
be edited.
<Polygonal-shape stitching pattern step edit screen>
❶
❺
④
Performing sewing using the edited sewing pattern
<Sewing screen (Polygonal-shape stitching pattern)>
Press
❻
to conrm the data and
return the current screen to the polygo-
nal-shape stitching pattern edit screen.
This screen reects the data you have set
in the aforementioned procedure.
Press
❻
again to return the current
screen to the sewing screen of the po-
lygonal-shape stitching pattern you have
edited.
❻
❷
Refer to
"4-2-4.(2) Setting items for the polygonal-shape stitching steps" p.36
.
* The teaching screen is displayed by pressing
❺
during selection of the number of stitches. (Only
in the case the number of stitches can be changed.) Refer to
"4-2-6. Teaching function" p.38.
・
A step is added after the currently-selected step by pressing "+", or before the currently-selected
step by pressing "−" of
❷
.
・
A step is added at the end of steps by pressing "▼" of
❶
while the leading step is being
selected.
・
A step is added at the end of steps by pressing "▲" of
❶
while the ending step is being
selected.
3. The step that is being selected can be deleted by pressing
❽
. All the steps in a polygo-
nal-shape stitching pattern can be deleted by keeping it held pressed for one second.
To Next Page
Loading...
Need help?
General
