JUKI IP-110 Type F User Manual

- 11 -
(2) Overlapped stitching pattern
B B
A C C
D
Press to display the pattern list screen.
1) Press switch
1
to select the overlapped stitching pattern, and the screen is automatically changed over
to the number of stitches of overlapped stitching setting screen to display the number of stitches which
has already been set.
2) When changing the number of stitches, change it with switches
2
and
3
for setting the number of stitch-
es for processes A through C. To change the number of times of the whole processes, change it with
switches
4
and
5
for setting the number of processes D.
(The range of the number of stitches A, B and C that can be changed : 0 to 19 stitches. The range of the
number of processes D that can be changed : 0 to 9 times)
3) Depress the front part of the pedal once, and the sewing machine will repeat the normal stitching and
reverse stitching as many as the number of specied times. Then the sewing machine will automatically
make the thread trimmer actuate and will stop to complete the overlapped stitching procedure. (The one-
shot automatic stitching cannot be turned OFF.)
4) When thread trimming prohibiting function
6
is selected, the machine will stop with the needle up upon
completion of the overlapped stitching procedure without performing thread trimming.
1
2
3
5
6
4

JUKI IP-110 Type F Specifications

General

Brand	JUKI
Model	IP-110 Type F
Category	Sewing Machine
Language	English