JUKI IP-110 Type F User Manual

- 24 -
16. FUNCTION SETTING
Functions of the sewing machine can be programmed and the number of stitches and the number of
revolutions can be changed.
Refer to the Instruction Manual for the SC-920 for how to change the function setting items and for the details
of the functions.
1) Keeping switch
1
held pressed, turn the power
ON. Then the screen is changed over to the
function settings list screen.
When you press switch
2
, the screen is
changed over to the function setting display
screen.
[Function settings list screen]
12
2) Function setting item number can be incremented
or decremented by pressing switches
3
and
4
.
3) Once you have determined the target function
setting number, press switch
5
. The screen
is changed over to the function setting popup
screen.
[Function setting display screen]
4) Function setting item number can be incremented
or decremented by pressing switches
6
and
7
.
5) Once you have completed set value changing,
press switch
8
. The screen is changed over
to the function setting display screen and the
changed set value is displayed on the screen.
6) Turn OFF the power switch to exit from the func-
tion setting.
* To change two or more different function setting
numbers, repeat the aforementioned steps of
procedure 2) through 5) as required.
[Function setting popup screen]
6
4 5
3
Function
setting No.
Set value
7 8
Example) [To change the number of stitches 0 to 3 using the soft-start function (function setting No. 1)]
1) Press switches
3
and
4
to select function set-
ting No. 1.
2) Press switch
5
. The screen is changed over to
the function setting popup screen.
[Function setting display screen]
4 5
3

JUKI IP-110 Type F Specifications

General

Brand	JUKI
Model	IP-110 Type F
Category	Sewing Machine
Language	English