- 25 -
Refer to the Instruction Manual for the function setting list and the details of the function setting
items.
3) Press switches
6
and
7
to change the set
value to 3.
[Function setting popup screen]
4) Press switch
8
. The screen is changed over to
the function setting display screen.
5) The changed set value is displayed on the func-
tion setting display screen.
6) Turn OFF the power switch to exit from the func-
tion setting.
[Function setting display screen]
6
7
8
*
Do not change the set values with asterisk (
*
) mark as they are functions for maintenance. If the standard set value set at the
time of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
If it is necessary to change the set value, please purchase the Engineer’s Manual and follow the instructions.
Function setting list
No
Item Description
Setting range
Indication of function setting
1 Soft start
function
The number of stitches to be sewn at a low speed when the soft-
start function is used at the start of sewing.
0 : The function is not selected.
1 to 9 : The number of stitches to be sewn under the soft-
start mode.
0 to 9
(Stitches)
1 0
2 Material end
sensor function
This item is not used on the IP-110F.
0/1
2 0
3
Thread trimming
function by
material end
sensor
This item is not used on the IP-110F.
0/1
3 0
4 Number of
stitches for
material end
sensor
This item is not used on the IP-110F.
0 to 19
(Stitches)
4 5
5
Flicker reducing
function
Flicker reducing function
0 : Flicker reducing function is not operative.
1 : Flicker reducing function is effective
0/1
5 0
6 Bobbin thread
counting
function
Bobbin thread counting function
0 : Bobbin thread counting function is not operative.
1 : Bobbin thread counting function is operative.
0/1
6 1
*
7 Unit of bobbin
thread counting
down
Unit of bobbin thread counting down
0 : 1 Count/10 stitches
1 : 1 Count/15 stitches
2 : 1 Count/20 stitches
3 : 1 Count/thread trimming
0 to 3
7 0
To Next Page
Loading...
Need help?
General
