PREFACE
This Engineer’s Manual is written for the technical personnel who are responsible for the service and maintenance
of the machines.
The Instruction Manual for these machines intended for the maintenance personnel and operators at an apparel
factory contains operating instructions in detail. And this manual describes “Standard Adjustment”, “Adjustment
Procedures”, Results of Improper Adjustment”, and other important information which are not covered by the
Instruction Manual.
It is advisable to use the relevant Instruction Manuals and Parts Lists for LZ-2290A and LZ-2290A-SR together
with this Engineer’s Manual.
This manual gives the “Standard Adjustment” on the former page under which the most basic adjustmenr value
is described, and on the latter page “Results of Improper Adjustment” under which stitching errors and troubles
arising from mechanical failures are described together with the “Adjustment Procedures”.
To Next Page
Loading...
Need help?
General
