− 1 −
LZ-2290A-SU / -7
4,500 rpm (*1)
2.5 mm/2.5 mm (*3)
(Stepless fine adjustment)
1.4mm
LZ-2290A-SS / -7
5,000 rpm (*1)
5 mm/4 mm (*3)
(Stepless fine adjustment)
1.2 mm
LZ-2290A-DS / -7
5mm/4 mm (*3)
(Stepless fine adjustment)
1.2 mm
Light- to medium-weight materials
10 mm (*2)
8 kinds 14 patterns
(Custom pattern : 500 stitches, 20 kinds can be stored.)
SCHMETZ 438, ORGAN DPX5 : #65 to #90
178 mmX517 mm
4,000 rpm (Excluding a certain territory of export)
33.4 mm
Built-in in the upper face of machine head type (with bobbin thread retaining plate)
Electromagnetic front-wiping system (WB), electromagnetic side-wiping system (CB)
Built-in electromagnetic system
5.5 mm
10 mm
6 to 6.5 mm
Direct drive system (compact AC servo motor)
Timing belt system
Rated output 450W
3-phase 200 to 240V, Single phase 100 to 120V
DC34V
Presser foot micro-lifting screw is provided as standard.
1. AK-121 (Auto-lifter : Part No. : GAKA21000B0)
2. Exclusive grease tube for maintenance 10g (JUKI grease A Part No. : 40006323)
3. Exclusive grease can for maintenance 500g (Part No. : 23640204)
4. Touch-back kit asm. (Part No. ; 40010795) ... Other than WB, CB, OB, A-SR)
5. Optional switch kit (Part No. ; 40003640)
LZ-2290A-DU / -7
2.5mm/2.5 mm (*3)
(Stepless fine adjustment)
1.4mm
1. SPECIFICATIONS
* 1 : The sewing speed is regulated in accordance with zigzag width (A-SR : zigzag width and feed amount).
* 2 : Zigzag width is regulated to 8 mm at the time of delivery. (Max. zigzag width of all machines is 10 mm.)
* 3 : Normal and reverse feed amounts are regulated to 2 mm at the time of delivery.
Model
Application
Max. sewing speed
Max. zigzag width
Max. feed amount
(Normal/reverse)
Stitch pattern
Needle
Dimension of the bed
Number of revolution
of resistor pack
Needle bar stroke
Bobbin winder
Wiper
Automatic reverse
stitching device
Lubrication
Lift of the presser foot
(by hand lifter)
Lift of the presser foot
(by knee lifter)
Lift of the presser foot
(by AK auto-lifter)
Kind of the hook
(Part No.)
Bobbin case (asm.)
Height of the feed dog (standard)
Lubrication of the face
plate section
Drive system
Transmission function
Motor output
Operating power
Solenoid drive power
Additional function
Major optional
devices
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Lubrication system to oil tank for hook
lubrication
JUKI New Defrix Oil No. 1 is used.
(Equivalent to ISO VG7)
Plunger pump is employed.
22525877
40003598 (with idle-prevention spring)
Minute quantity lubrication by oil wick
Full non-lubrication
23557259 (Non-lubrication hook)
Non-lubrication
4,000 rpm (*1)
LZ-2290A-SR-7
5,000rpm (*1)
5mm/5 mm
(0.1 adjustment by electronic control)
14 kinds 20 patterns
Stepping motor
control
Lubrication system to
oil tank for hook
lubrication
JUKI New Defrix Oil
No. 1 is used.
(Equivalent to ISO
VG7)
Plunger pump is
employed.
22525877
40003598
(with idle-
prevention spring)
1.2 mm
Minute quantity
lubrication by oil wick
(1) Specifications of the machine head
40003609 (with idle-prevention spring)
To Next Page
Loading...
Need help?
General
