To Next Page

To Previous Page

– 44 –

5-9. Function setting for the SC-922 (LU-2818-7, LU-2868-7)

This section describes how to set the functions of the SC-922 specic to the LU-2818-7 and 2868-7 (Long

pitch type).

Refer to

"6. Function setting for the SC-922" in the Instruction Manual for the SC-922

Function setting list

No Item Description

Setting

range

Indication of function

setting

158 Condensation

stitching

function during

thread trimming

The function is enabled when the SC-922 is used in combina-

tion with the machine head which is provided with condensa-

tion stitching function for thread trimming.

This item is used for setting whether or not the output of con-

densation stitching function for thread trimming is produced

while the thread trimmer is under control.

0 : The function is disabled

1 : The function is enabled

0/1

1 5 8

●

Condensation stitching function during thread trimming (function setting No. 158)

This function setting number is used for setting whether or not the output of condensation stitching func-

tion for thread trimming is produced while the thread trimmer is under control.

When this setting is set to "0" (condensation stitching function is disabled), the same thread trimming

control as the LU-2810-7 is carried out.

0: Condensation stitching function is disabled

1: Condensation stitching function is enabled (initial value)

51 8 1

If thread trimming failure occurs, with a heavy-weight material, since the needle enters the same entry

points repeatedly when carrying out condensation stitching during thread trimming, the condensa-

tion stitching function during thread trimming should be disabled, or adjust to increase the conden-

sation stitch pitch.

Details of the function setting

JUKI LU-2818-7 User Manual

Other manuals for JUKI LU-2818-7