– 154 –
9-10. Key customization
9-10-1. Assignable data
It is possible to register a desired function to a key to customize the peel key arrays. Functions that can be
assigned to panel keys are as described below.
The key to which no function is assigned is displayed in blank.
<Sewing screen (Operator mode)> <Sewing screen (Maintenance personnel mode)>
<Sewing screen (Cycle mode)>
Initial value
Assignable data
Operator mode
Maintenance personnel
mode
Cycle mode
Counter Counter Counter Sewing pattern data
Sewing pattern number
Cycle pattern number
Memory switch
One-touch changeover
Bobbin winding
Sewing adjustment
Counter
Function is not provided
Sewing speed Sewing speed Sewing speed Sewing pattern data
Sewing pattern number
Cycle pattern number
Memory switch
One-touch changeover
Bobbin winding
Sewing adjustment
Function is not provided
Alternating vertical move-
ment amount
Thread trimming Thread trimming
Needle thread tension, left Needle thread tension, left Needle thread tension, left
Needle thread tension, right Needle thread tension, right Needle thread tension, right
Stitch length Stitch length Stitch length
Thread trimming Presser foot pressure Presser foot pressure
Sewing data list Alternating vertical move-
ment amount
Alternating vertical move-
ment amount
Stop position of needle bar
Stop position of needle bar
Sewing adjustment
To Next Page
Loading...
Need help?
General
